Even if you don’t use your laptop as your main device, it might be stressful when it won’t startup. However, it’s critical to take a big breath and consider all of the possible contributing factors. We’ve advised on how to turn on an HP laptop or what if laptop is not starting. If it’s one of the following listed below.
- Inspect The Power Source.
If you think that ‘my HP laptop won’t turn on but the power light is on’ As far as issues go, this is one of the most frequent. It is possible that the inappropriate laptop power supply (which provides the incorrect voltage) or a blown fuse in the plug is the cause of the problem. Inspect the adapter you’re using to ensure that it’s the proper one for your laptop and that it’s providing the necessary voltage and amperage for the device.
Verify that the adapter you’re using is compatible with your laptop and is producing the proper amount of voltage and amps before proceeding any further. In order to confirm this, search for stickers or marks on the power supply as well as the computer itself.
Additionally, some third-party chargers output power at a speed only equal to what your device requires to operate. When a device is in sleep mode, it loses a significant amount of battery power, and if one of these chargers is used, the laptop won’t turn on or charge.
You may accidentally connect the incorrect power supply to your laptop if you have many computers with the same plug size. This might result in a different voltage or insufficient current depending on your computer’s needs, especially if you have multiple computers with the same connector size.
What is causing my laptop to refuse to turn on even when it is connected in to a power source?
If the charger is correct, the next step is to inspect the plug for a blown fuse. Removing and replacing the fuse with a new one that has been thoroughly tested and shown to be secure should be done using a screwdriver. If you have a spare power cord, you can immediately rule out a blown fuse.
Power supplies, particularly if you carry them around all the time, become battered, so be sure to look over the cable itself. Cables that connect to the black brick and the socket on the laptop are more likely to break. If you can see the wires within the black shell of your power supply, you may need to get it replaced (PSU).
If you’re experiencing issues with your touchpad, have a look at our tutorial on how to repair a frozen cursor.
2: Look at the Display.
Experiment with disabling any external displays which indicate the laptop not starting up but the power light is on as projector screens and monitors, to see if this fixes the problem.
There may be a faint image on the screen even though your computer’s power LED is on and you can hear the hard drive or fan(s) moving. Often, a laptop’s screen is the issue rather than the computer itself.
The inverter may have failed if you see a dim picture – maybe the Windows login screen – but this only applies to older laptops without LED backlights.
There are a few considerations to bear in mind while preparing to replace an inverter. When it comes to inverters, there’s no room for error. Professionals should handle this, but if your laptop is more than a few years old, it may be time to get a new one.
If your laptop boots OK but has no display, it’s possible that the LCD screen is malfunctioning. Replace a laptop screen is technically possible; however the operation may be time-consuming and costly depending on the model. When doing this procedure, removable USB drives or memory cards may be utilized.
- If the power supply and the screen are OK, your computer may be unable to launch Windows.
If you find yourself in this predicament, a USB drive or memory card that has been left in the USB port or card reader is a regular culprit. A common error message is “Operating system not found,” which may cause undue anxiety and stress for the user.
That the BIOS are set to boot from external storage devices (such memory cards) before the internal hard disc.
4: Boot into safe mode.
You may be able to go into safe mode even if Windows won’t startup. If you hold down the F8 key while your laptop is booting, you’ll be presented with an option to enter Safe Mode. This is the procedure for entering safe mode. You must be in Windows before you can access safe mode in Windows 10, therefore this won’t work. Using a rescue disc or drive as stated above will be necessary for this instance.
In certain cases, if you are able to enter safe mode, you may be able to undo any alterations that have caused your HP laptop to cease booting. If the existing user account is corrupt, you may want to consider removing any newly installed software, deleting any recently updated drivers, or creating a new user account. Do everything you can to fix your HP laptop if you can find it.
You may either burn or extract a rescue disc image from another computer that you have downloaded. If you don’t have one, the Windows DVD may be utilized. Once you’ve done that, you may try to repair Windows from there.
The best way to get rid of a virus is to utilize an anti-virus program’s “rescue disc,” which includes scanning capabilities that can identify and eradicate the virus in question.
5: Check for hardware malfunctions or compatibility issues.
A new piece of hardware you just installed may be stopping your computer from starting up. Try again after removing it and restoring the old memory, if required.
Find out what POST codes indicate if your motherboard has an LED display that displays them.
Getting a new HP laptop to startup might be a challenge. Unplugging everything except the essentials will allow you to boot into the BIOS.
- The motherboard and the central processing unit (with heatsink attached)
- Graphics card (remove any plug-in graphics cards if your motherboard has one)
- A single memory stick (remove any others, and leave the single stick in slot 0 or whichever the manual recommends)
- An electrical source